How to Turn a Giant Flower Kit Into a Party Centerpiece

Key Takeaways
For a first-time builder, expect 90 minutes to 2 hours for the full assembly including the base setup. Once you've built one, the second and third go much faster — most of my repeat customers get it down to under an hour.
The video tutorials included with every kit make a huge difference. Don't skip them, even if you think you can figure it out from the instructions alone.
Yes, with some caveats. EVA foam is moisture-resistant, so light outdoor use is totally fine. Avoid leaving it in direct sun for extended periods — UV exposure can fade colors over time. Also, wind is your enemy for table centerpieces outdoors. Make sure your base is extra heavy if you're setting up outside.
For outdoor events, I always recommend a weighted pot base rather than a vase, and securing the stem with a bit of floral wire to the base structure for extra stability.
The general rule is 18–24 inches above the table surface for seated dinner tables. This keeps the flower visible and impactful without blocking sightlines between guests. For cocktail tables or standing-height surfaces, you can go taller — up to 30 inches.
If you're unsure, err on the shorter side. You can always add a taller vase or riser to gain height, but you can't un-cut a stem.
Can I customize the color of my giant flower kit?
Absolutely — and this is one of my favorite things about EVA foam. Spray paint, acrylic paint, and even fabric dye all work beautifully on EVA foam. I recommend assembling the flower first, then painting, so you get even coverage across all the layered petals.
For a flawless finish, check out our detailed guide on foam board paint finishes — it covers everything from prep to sealing.
Store the flower head and stem separately. Wrap the flower head loosely in tissue paper or a soft cloth and place it in a large box — don't stack anything heavy on top of it. The stem can be stored flat or coiled gently. Avoid crushing the petals, as EVA foam can take a permanent set if compressed for too long.
Most of my customers store their flowers in a large plastic tote or a dedicated garment box. Properly stored, an EVA foam flower can last 3–5+ years with regular use.
Nope — that's honestly one of the best things about our kits. The main tool you need is a hot glue gun, which most crafters already own. A pair of scissors for trimming the stem, and that's basically it. No special cutters, no heat tools, no sewing.
If you want to paint the flower, a few cheap foam brushes or a can of spray paint rounds out your toolkit. Total additional investment: under $20 in most cases.
There's something genuinely magical about watching a flat stack of foam pieces transform into a flower that makes people gasp when they walk into a room. I've been doing this for years and it still gets me every single time. If you're ready to build your first giant flower kit party centerpiece, head over to our shop and find the kit that matches your vision. And if you're not sure where to start, send me a message — I love helping people pick the right kit for their event. You've got this.
Frequently Asked Questions
How long does it take to build a giant flower kit party centerpiece?
For a first-time builder, I usually tell people to expect 90 minutes to 2 hours for the full assembly, including the base setup. Once you’ve built one, the next ones go much faster. Most repeat customers get the process down to under an hour.
What tools do I need to assemble a giant flower kit?
The main tool I recommend is a hot glue gun, and most crafters already have one. A pair of scissors for trimming the stem is also helpful. If you want to paint the flower, a few foam brushes or a can of spray paint can round out your toolkit.
How tall should a giant flower kit party centerpiece be?
For seated dinner tables, I like to keep the flower 18–24 inches above the table surface so it stays visible without blocking sightlines. For cocktail tables or standing-height surfaces, you can go taller, up to 30 inches. If you are unsure, I recommend erring on the shorter side.
Can I customize the color of my giant flower kit party centerpiece?
Absolutely, and that is one of my favorite things about EVA foam. Spray paint, acrylic paint, and even fabric dye all work beautifully on it. I recommend assembling the flower first and then painting it for the most even coverage across the layered petals.
What should I do to store a giant flower kit after use?
I recommend storing the flower head and stem separately. Wrap the flower head loosely in tissue paper or a soft cloth and keep it in a large box without stacking anything heavy on top. Properly stored, an EVA foam flower can last 3–5+ years with regular use.
Ready to start your own? Everything I use for projects like this is in the shop. A great place to begin is the Real Touch Stargazer Lily Foam Kit and the Glue Gun + Sticks. Have questions while you build? Reach out anytime. I can't wait to see what you create!
Shop the supplies
Everything You Need for This Project

Real Touch Stargazer Lily Foam Flower Kit — Tropical DIY Lilies with Painted Center, Reusable Mold & Pre-Cut Petals

Hot Glue Gun + 4 Silicone Glue Sticks — Fast, Strong Petal Assembly

Make Craft Flower Giant Lily Kit – Pre-Cut Easy

Summer Party Decor - Leo Tulip DIY Kit - Pre-Cut & Easy

Written by
Adriana WellsFounder & CEO of Amazing Giant Flowers
Adriana Wells is the founder and creative force behind Amazing Giant Flowers, a Texas-based company specializing in handcrafted giant foam flowers, luxury floral installations, and DIY flower-making supplies.
More about Adriana →Ready to Create Something Amazing?
Browse our collection of giant flower kits and start your next project today.



